3
Telephone settings
Default settings are indicated by an asterisk(*).
Screen display Function Options
LCD language Set the screen display
language.
English*
Français
Español
Clr voicemail Turn off the voicemail
indicators.
Clear VM icon?
Key tone Set whether the handset
beeps whenever a key is
pressed.
On*
Off
Set date/time Set the date and time for
the telephone system.
-:-- --/--
Home area code Set the home area code
so that the call log stores
only seven digits for local
telephone numbers.
_ _ _
Dial mode Set the handset to be tone
dial or pulse dial.
Tone*
Pulse
Using the menu
To enter the handset menu:
Press MENU/SELECT when the telephone is not in use.
Press CID or until the screen displays the desired
feature menu.
Press MENU/SELECT to enter that menu.
To return to the previous menu, press OFF/CANCEL.
To return to idle mode, press and hold OFF/CANCEL.
1.
2.
3.
•
•
Make a call
Press /FLASH and then dial the telephone
number.
-OR-
Predial by rst dialing the telephone number
and then press /FLASH.
Answer a call
Press /FLASH or any of the dialing keys.
End a call
Press OFF/CANCEL or put the handset in the telephone base
or charger.
Redial
The telephone stores the ve most recently dialed numbers.
When there are already ve entries, the oldest entry is deleted to
make room for the new entry.
To review and dial a number from the redial list:
Press REDIAL/PAUSE when the handset is
not in use.
Press CID, or REDIAL/PAUSE
repeatedly until the desired entry displays.
Press /FLASH to dial.
To delete a redial entry:
When the desired redial entry displays, press MUTE/DELETE.
•
•
1.
2.
3.
Telephone operation
To Next Page
Loading...
Need help?
Frequency and Channels
Memory
