www.vtechphones.com
4
Getting started
2.56in (65mm)
Wall mounting
Your telephone base is ready for desktop use. If wall mounting is desired,If wall mounting is desired,
obtain appropriate hardware to be used as mounting studs, and follow the
instructions below:
Fasten two mounting studs (not included) on the wall where you want to mount the
telephone base. The width between the mounting studs should be 2.56in (65mm).
Use the template on page 74 for drilling holes for the wall mounting studs.
Align the holes on the telephone base with the mounting studs on the wall.
Slide the telephone base down until it locks securely.
Bundle the telephone line cord and power adapter cord neatly with a twist tie.
1.
2.
3.
4.
You can purchase
mounting
hardware from
many hardware
or home
improvement
stores.
•
To Next Page
Loading...
