VTech CS6648-3 - Wall Mount to Tabletop Installation

Getting started
7
Wall mount to tabletop installation
Remove the telephone base from the wall.
If necessary, untie the bundled telephone line cord and power adapter cord.
Pull the wall mount bracket to detach it from the telephone base. Swivel it upwards
and then press onto the telephone base until it clicks into place.
1.
2.
3.
Press down on the switch hook and slide the handset tab upwards to remove it from
the slot. Rotate the handset tab by 180 degrees. Press down the switch hook and
then replace the handset tab to its slot.
4.
Tabletop positionWall mount position
Handset tab
Switch hook