VTech CS6648-3 User Manual

Telephone operation
22
Redial
The last 10 telephone numbers dialed (up to 30 digits) are stored in the system memory.dialed (up to 30 digits) are stored in the system memory. (up to 30 digits) are stored in the system memory.
Each handset and the telephone base store the last 10 telephone numbers dialed
(up to 30 digits) independently. When there are already 10 entries, the oldest entry is
deleted to make room for the new entry.
To review and dial a redial number on a cordless handset:
Press REDIAL when the phone is not in use.
Press , or REDIAL repeatedly to browse.
When the desired entry displays, press or to dial.
-OR-
Press or
when the phone is not in use.
Press REDIAL.
Press , or REDIAL repeatedly to browse.
When the desired entry displays, press SELECT to dial.
To review and dial a redial number at the
telephone base:
Press REDIAL when the phone is not in use.
Press , or REDIAL repeatedly to browse.
When the desired entry displays, lift the corded handset or
press /SPEAKER to dial.
-OR-
Lift the corded handset or press /SPEAKER when the phone is not in use.
Press REDIAL.
Press , or REDIAL repeatedly to browse.
When the desired entry displays, press SELECT to dial.
To delete a redial number on a cordless handset:
While the screen displays the desired number, press DELETE to delete the
redial number.
To delete a redial number on the telephone base:
While the screen displays the desired number, press X/DELETE to delete the
redial number.
1.
2.
3.
1.
2.
3.
4.
1.
2.
3.
1.
2.
3.
4.
•
•
800-595-9511
Redial#3/4
ECO

VTech CS6648-3 Specifications

General

Brand	VTech
Model	CS6648-3
Category	Cordless Telephone
Language	English