8
Install the battery
Install the battery as shown below.
Use only the battery provided.
Charge the battery provided with this
product only in accordance with the
instructions and limitations specified in this
manual.
If the handset will not be used for a long
time, disconnect and remove the battery to
prevent possible leakage.
•
•
•
Check the battery level
After you have installed the battery,
check the battery level on the handset
screen.
If the battery icon is
, or
, then go
to Before use section to set the date
and time, and set the answering
system through voice guide.
If the screen is blank, or
flashes,
then the battery needs to be
charged. Go to Charge the battery
section before you do any setting or
operation.
Charge the battery
Place the handset in the handset
charger to charge.
Once you have installed the battery,
the handset LCD display indicates the
battery status (see the table below).
Battery
indicators
Battery
status
Action
The screen
is blank, or
shows Put
in charger
and
flashes.
The battery
has no
charge or
very little
charge. The
handset
cannot be
used.
Charge
without
interruption
(at least 30
minutes).
The screen
shows Low
battery and
flashes.
The battery
has enough
charge to be
used for a
short time.
Charge
without
interruption
(at least 30
minutes).
•
•
To Next Page
Loading...
Need help?
General
Weight and Dimensions
