VTech CS6949-2 User Manual

18
2. To answer the intercom call on the
destination handset, press , INT,
or any of the dialing keys. Both
devices now show Intercom.
3. To end the intercom call at the
telephone base, press INT, or
/SPEAKER when using the base
speakerphone, or place the corded
handset back to the telephone base.
-OR-
To end the intercom
call on the
destination handset, press OFF, or
place the handset back in the handset
charger.
NOTES
If you do not have any cordless handset
registered to the telephone base, you will
hear two beeps when you press INT on the
base.
You can cancel the intercom call before it is
answered by pressing CANCEL or INT.
If the destination handset is not powered,
out of range, on a call, or does not answer
the intercom call within 100 seconds, your
telephone base displays Unable to call and
then returns to idle mode.
Answer an incoming call during
an intercom call
When you receive an outside call during
an intercom call, there is an alert tone.
Press on the cordless handset, the
intercom call ends automatically.
Press /SPEAKER on the
telephone base to end the intercom
call. Then press /SPEAKER again
to answer the call.
Place the corded handset back to the
base. Then lift it up again to answer
the call.
•
•
•
•
•
•
Call transfer using intercom
Use the intercom feature to transfer an
outside call to another system handset.
To transfer a call with a cordless
handset:
During a call, press INT.
If you have only one handset, the
outside call is put on hold and your
handset displays Calling base.
The telephone base rings and
shows HS 1 is calling.
If you have two or more handsets,
your handset displays Intercom
to:. Press 7 for the telephone
base or 1-5 for HANDSET 1 to
HANDSET 5. The outside call
is put on hold and your handset
displays Calling HS X/Calling
base.
The destination handset rings and its
screen displays HS X is calling.
To answer the intercom call on the
destination handset, press , , INT
or any dialing key (0-9,
,
or ).
The outside call is still on hold and both
handsets now display Intercom. You
can now have a private conversation
with the destination handset.
-OR-
To answer the call at the telephone
base, press INT, /SPEAKER, any
of the dialing keys or lift the corded
handset. The outside call is still
on hold and both devices display
Intercom. You can now have a
private intercom conversation.
1.
•
•
2.

VTech CS6949-2 Specifications

General

Speakerphone	yes
Expandable	yes
Volume Control	no
Intercom	yes
Incoming Lines	1
Record Time	22 minutes
Caller ID	yes
Call Waiting	yes
Answering System	yes
Flash Function	no
Conference Call	yes
Caller ID Memory	30 gigabytes
Phone Book Memory	50 gigabytes
Handsets	yes
Expansion Base Stations	1
Expansion Handsets	1, 5
Backlit Keypad	yes
Frequency	dect 6.0 digital
Battery Capacity	300 milliampere hours

Weight and Dimensions

Depth	7.8 inches
Height	4.4 inches
Net Weight	32 ounces