TO TEST YOUR AUDIO MONITOR
1. Place the portable unit and the monitor unit in the same room to test the product.
2. Press and hold on the monitor unit until the POWER light turns off.
3. Press and hold on the monitor unit again until the POWER light turns on.
4. Press and hold on the portable unit the POWER/LINK light turns off.
5. Press and hold on the portable unit again until the POWER/LINK light turns on.
If the portable unit is not linked to the monitor unit, the POWER/LINK light on the portable unit
will flash. Move the portable unit closer to the monitor unit (not less than 3feet)
POSITIONING THE AUDIO MONITOR
Place the portable unit within the operating range of the monitor unit.
We recommend the portable unit is at least 1 meter (3 feet) away from the monitor unit
to avoid audio feedback.
If you still experience audio feedback, move the portable unit and the monitor unit
farther apart.
Pg. 3
To Next Page
Loading...
Need help?
General
