Overview – Parent unit
1. 3- level sound indicator light
• Green on when low sound level is detected by the baby unit.
• Green and amber on when moderate sound level is detected by the baby unit.
• Green, amber and red on when high sound level is detected by the baby unit (e.g. baby crying loudly).
2. LCD display
3. Changeable face plate
4. Increase Volume
• Press to increase the speaker volume (Level 1 to Level 5).
• While in a menu, press to scroll up.
5. Battery indication light
• On when the parent unit’s batteries are charging.
• Flashes when the batteries are low and need charging.
6. Talk
• Press and hold to talk to your baby.
7. Power On
• Press and hold to power on. Press and hold again to power off.
• While in a menu, press to return to the previous menu.
8. Microphone
9. Alarm Timer
• When in idle mode, press to set the alarm timer.
• When setting the alarm timer, press to exit.
10. Menu
• Press to enter the menu.
• While in a menu, press to choose an item, or save a setting.
• When setting the alarm timer, press to exit.
11. Music
• Press to play or stop playing the lullaby or recorded voice.
• When setting the alarm timer, press to reset the timer to 00:00.
12. Decrease Volume
• Press to decrease the speaker volume (Level 1 to Level 5).
• Press repeatedly until the volume reaches the minimum to turn it off.
• While in a menu, press to scroll down.
13. Speaker
14. Belt clip
15. Power jack
16. Battery compartment cover
Parent unit icons
Status icons
Connection status
displays when strong signal strength is detected between the baby unit and the parent unit.
displays when moderate signal strength is detected between the baby unit and the parent unit.
displays when the weak signal strength is detected between the baby unit and the parent unit.
flashes when the link between the baby unit and the parent unit is lost.
Sound alert
Displays when the sound alert of the parent unit is turned on.
Flashes when there are loud sounds detected from the baby unit.
Night light
Displays when the nigh light is turned on.
Mute
Displays when the parent unit speaker volume is turned off.
Battery status
animates when the battery is charging.
displays solid when the battery is fully charged.
displays empty when the battery is in low level and needs charging.
No battery icon displays when there is no battery installed.
Parent unit display screen messages
NOT LINKED: The link between the parent unit and the baby unit is lost.
TALK: You are using the parent unit to talk to your baby.
HIGH TEMP: The baby unit detects that the baby room’s temperature has risen above 86oF.
LOW TEMP: The baby unit detects that the baby room’s temperature has dropped below 50oF.
LOW BATT: The parent unit’s batteries are low and need to be recharged.
SONG X (Lullaby name): One of the lullaby or the record voice is playing.
To Next Page
Loading...
