VTech DM1215 - Sound sensitivity and sound alert; Need help?; General product care; Storage

77F : The temperature level detected in the baby’s room.
Sound sensitivity and sound alert
Adjust the sound sensitivity of the baby unit
You can choose to hear sounds from the baby unit all the time, or to hear sounds that exceed a certain level. You can use the parent unit to adjust the VOX sensitivity of your baby unit to
detect sound. The higher the sensitivity level, the more sensitive the baby unit is in detecting sounds for transmitting to the parent unit. The VOX sensitivity level is preset to LEVEL 3.
VOX
Sensitivity level Off Level 4 Level 3 Level 2
Description
The parent unit speaker is constantly on, and
you will hear
all sounds (including background noises) from
your baby’s room.
The parent unit speaker turns on
for soft babbling and louder
sounds from your baby. It
remains quiet when your baby
sleeps soundly.
(Default setting)
The parent unit speaker turns on
for loud babbling and louder
sounds from your baby. It remains
quiet when your baby makes soft
sounds.
The parent unit speaker turns
on
for crying and louder sounds
from your baby. It remains quiet
when your baby makes soft
sounds.
Need help?
For latest information and supports, go and check our website.
Use your smartphone or mobile device to access our online support.
Go to https://help.vtechphones.com/dm1215 or https://help.vtechphones.com/dm1215-2; OR
Scan the QR code on the right. Launch the camera app or QR code scanner app on your smartphone or tablet. Hold the device’s camera up to the QR code and frame it. Tap the
notification to trigger the redirection of the online support.
If the QR code is not clearly displayed, adjust your camera’s focus by moving your device closer or further away until it is clear.
You can also call our Customer Support at 1 (800) 595-9511 [in US] or 1 (800) 267-7377 [in Canada] for help.
General product care
To keep this product working well and looking good, follow these guidelines:
Avoid putting it near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps).
DO NOT expose it to direct sunlight or moisture.
Avoid dropping the product or treating it roughly.
Clean with a soft cloth.
DO NOT immerse the parent unit and the baby unit in water and do not clean them under the tap.
DO NOT use cleaning spray or liquid cleaners.
Make sure the parent unit and the baby unit are dry before you connect them to the mains again.
Storage
When you are not going to use the baby monitor for some time, store the parent unit, the baby unit and the adapters in a cool and dry place.
Disclaimer and Limitation of Liability
VTech Communications, Inc. and its suppliers assume no responsibility for any damage or loss resulting from the use of this user’s manual. VTech Communications, Inc. and its suppliers
assume no responsibility for any loss or claims by third parties that may arise through the use of this product.
Company: VTech Communications, Inc.
Address: 9020 SW Washington Square Road – Ste 555 Tigard, OR 97223, United States
Phone: 1 (800) 595-9511 in the U.S. or 1 (800) 267-7377 in Canada
FCC and IC regulations