Talk to your baby via the baby unit:
1. Press and hold the key on the parent unit.
2. Speak to your parent unit. Your voice is transmitted to the baby unit.
3. When finish talking, release the key and hear your baby again.
Set up alarm timer
You can set up alarm reminder with the parent unit.
1. Press when the parent unit is not in use.
2. Press or to increase or decrease the countdown timer by 30 minutes with each press. You can set the timer up to the maximum of 24 hours.
3. Press or to confirm your selection. The screen displays SAVED and you hear a confirmation tone.
Notes:
You can check the remaining time by pressing when the alarm timer is running.
Press to reset the timer to 00:00. Press or to return to idle mode.
Change the face plate (Optional)
You parent unit(s) and baby unit each attached with a face plate, and your package include two additional face plates. There are three colors of the face plates – yellow, blue and pink. You
can change the unit’s face plate for easy identification of the units.
To Next Page
Loading...
