VTech DM221 - Baby Unit Installation

5
Getting started
Baby unit installation
Install the baby unit as shown below.
Make sure that the power outlet is not controlled by a wall
switch. Keep the power adapter cord away from children’s
reach and bundle the power adapter cord neatly with the
attached self-adhesive strap.
Use only the power adapters supplied with this product.
To order a replacement, visit our website at
www.vtechbabymonitors.com or call 1 (800) 595-9511.
In Canada, go to www.vtechcanada.com or call
1 (800) 267-7377.
The adaptesr are intended to be correctly oriented in a
XGTVKECNQTƀQQTOQWPVRQUKVKQP6JGRTQPIUCTGPQV
designed to hold the plug in place if it is plugged into a
ceiling, under-the-table or cabinet outlet.
•
•
Baby unit
Power outlet not
controlled by a
wall switch
Power adapter
Warning tag
Self-adhesive strap