Parent unit battery installation
You can power up the parent unit by connecting it to AC power
or to the rechargeable battery pack provided. Even if the parent
unit is connected to AC power, we recommend you also install
the battery pack. This guarantees continued operation in case
of a power outage.
Install the battery as shown below.
Unplug the parent unit adapter from the power outlet.
Unplug the small end of the power adapter cord from the
RQYGTLCEMQPVJGRQYGTLCEM
If the battery compartment cover is on the parent unit, press
on the indentation on the cover and slide to detach.
Place the battery with the label THIS SIDE UP facing up.
1.
2.
3.
To Next Page
Loading...
