VTech Drill & Learn Toolbox Pro User Manual

14
IMPORTANT NOTE
If the problem persists, please call our Consumer Services
Department at 1-800-521-2010 in the U.S., 1-877-352-8697 in
Canada, or by going to our website vtechkids.com and filling
out our Contact Us form located under the Customer Support
link. Creating and developing VTech products is accompanied by
a responsibility that we take very seriously. We make every effort
to ensure the accuracy of the information, which forms the value of
our products. However, errors sometimes can occur. It is important
for you to know that we stand behind our products and encourage
you to contact us with any problems and/or suggestions you might
have. A service representative will be happy to help you.
NOTE
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.

VTech Drill & Learn Toolbox Pro Specifications

General

Brand	VTech
Model	Drill & Learn Toolbox Pro
Category	Toy
Language	English

Summary

Introduction

Included in the Package

Tool Belt Assembly

Step-by-step instructions for assembling the toy's tool belt.

Warning and Safety Information

Unlock the Packaging Locks

Instructions on how to safely remove packaging locks from the toy.

Getting Started

Battery Removal and Installation

Guide for installing or replacing batteries in the toy.

Important Battery Information

Activating Normal Play Mode

Product Features Overview

On/Off/Volume Selector

Details on how to turn the unit on/off and adjust volume.

Mode Selector

Instructions for choosing different play modes and activities.

Tool Buttons

Explanation of the tool buttons for learning and interaction.

Holes and Project Cards

Information on using the holes for tools and inserting project cards.

Tools and Operation

Guide to using the drill, hammer, and wrench with screws and nails.

Automatic Shut-Off Feature

Explanation of the toy's automatic power-off function.

Activities

Free Play Mode

Details on how to play in Free Play Mode, with or without project cards.

Challenge Mode

Instructions for answering questions using tools and interacting with the toy.

Music Fun Mode

How to play songs and melodies through interactive play.

Song Lyrics

Care and Maintenance

Troubleshooting Guide

Steps to resolve common issues or malfunctions with the toy.

Important Note and Contact Information

Supplier's Declaration of Conformity