49
Telephone settings
Telephone base settings
Telephone base ringer volume
Press /VOL or /VOL on the side of telephone base to adjust the ringer
volume when the telephone is not in use. When you set the ringer volume to
zero, the base ringer is off and the system announces, “Base ringer is off.”
Press /VOL during an incoming call to mute the ringer temporarily.
Answering system settings
Go to Answering system settings starting on page 82 for instructions on
how to use a system handset to modify the answering system settings
shown below.
Setting Page
Answer on/off 82
Announcement (play, record and delete) 83-84
Call screening 85
Number of rings 86
Remote access code 87
Message alert tone 88
Recording time 88
See page 37 to set the handset ringer volume.
To Next Page
Loading...
Need help?
General
