Telephone operation
41
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to touch-tone
dialing temporarily during a call. This is useful if you need to send touch-tone
signals to access your telephone banking or long distance services.
During a call, press .
Use the dialing keys to enter the number you wish to dial. The telephone sends
touch-tone signals. It automatically returns to pulse dialing mode after you end
the call.
Find handset
This feature helps you nd misplaced handsets and headset.
To start the paging tone:
Press FIND HANDSET on the telephone base.
All idle handsets and headsets ring and the
handsets display ** Paging ** and the light on
the headset flashes in blue.
To stop the paging tone:
Press /HOME, OFF, , or any dialing key
(0-9 or ) on a handset.
-OR-
Press on the headset.
-OR-
Press FIND HANDSET on the telephone base.
-OR-
Place the handset in the telephone base or charger.
Press MUTE to turn off the ringer of a handset temporarily. Paging tone continues
on all other handsets.
Check voicemail
Press and hold 1 on the handset to dial your stored voicemail number.
To set your voicemail number, see Voicemail number on page 32.
1.
2.
•
•
•
•
•
•
** Paging **
To Next Page
Loading...
