15
Paired device - once a Bluetooth
enabled cell phone has been paired
with the telephone base, it appears
on the cell devices list. A maximum of
two cell phones can be paired with the
telephone base.
Pairing - this refers to the process of
Bluetooth enabled cell phone registering
device information with each other.
The telephone base must be paired
with the Bluetooth enabled cell phone
before it can be used. Depending on the
manufacturer, this is also referred to as
Bonding.
PIN - by default, the PIN is 0000 for the
telephone base and for most Bluetooth
devices. PIN information must be
exchanged between Bluetooth devices
before they can be used. This is also
known as a Passkey or Passcode.
Bluetooth setup
Make sure your cell phone has a good
cell reception near the telephone base.
To use a Bluetooth enabled cell phone
with your DS6771, you must first pair and
connect it with the telephone base. All
DS6771 handsets can be used to make or
answer on the cell phone line.
Bluetooth wireless technology operates
within a short range (15 feet). When
you pair a Bluetooth cell phone to the
telephone base, move closer to the
telephone base to maintain sufficient
signal strength.
For optimal performance, place your cell
phone next to the telephone base while
using the cell line.
To avoid interference from other
electronic devices, place your telephone
base far away from devices such as baby
monitors, wireless routers, microwaves
and computers.
•
•
•
To Next Page
Loading...
Need help?
General
