VTech DS6722-3 User Manual

40
Set your built-in answering
system
The answering system can record
and store up to  messages. Each
message can be up to three minutes in
length. The total storage capacity for the
announcement, messages and memos
is approximately 3 minutes. The actual
recording time depends on individual
message characteristics.
Your answering system allows you to set
your announcement, to save and delete
messages, activate call screening, to
set number of rings before pick up, and
to access remotely.
Turn the answering system on
or off
The answering system must be turned
on to answer and record messages.
When the answering system is turned
on, the /ANS ON/OFF light on the
telephone base turns on and ANS ON
displays on the handset.
To turn on or off with the
telephone base:
Press /ANS ON/OFF to turn the
built-in answering system on or
off. When the answering system is
turned on, it announces, “Calls will
be answered.” When the answering
system is turned off, it announces,
“Calls will not be answered.”
To turn on or off with the handset:
Press MENU when the handset is not
in use.
Press or to choose Answering
sys, and then press SELECT.
Press or to choose Answer on/
off, and then press SELECT.
Press or to choose On or Off,
and then press SELECT to save. You
hear a confirmation tone.
Set voice language
The voice prompt language is preset to
English. You can select English or French
to be used for the voice prompts in your
answering system.
Press MENU when the handset is not
in use.
Press or to choose Answering
sys, and then press SELECT.
Press or to choose Ans sys
setup, and then press SELECT.
Press or to choose Voice
language, and then press SELECT.
•
1.
.
3.
4.
1.
.
3.
4.
Telephone base control key panel:

VTech DS6722-3 Specifications

General

Brand	VTech
Model	DS6722-3
Category	Cordless Telephone
Language	English