21
Using the menu
You can use a cordless handset or the telephone base to change the
telephone settings.
In the ringers menu, you can select the ringer tones and adjust the ringer volume
for incoming calls.
In the settings menu, you can change the settings for LCD language, voicemail
number, voicemail indicators, key tone, home area code and dial mode.
Go to Answering system settings (from page 59 to page 64)
for instructions to change the answering system settings.
To enter the menu:
Press MENU when the phone is not in use.
Press or until the screen displays the desired
feature menu.
Press SELECT to enter that menu.
To return to the previous menu, press CANCEL.
To return to idle mode, press and hold CANCEL.
Handset ringer volume
You can adjust the ringer volume or turn the ringer off on
each handset. When the ringer is turned off, the handset
displays and Ringer off.
Press MENU when the handset is not in use.
Press or until the handset displays Ringers,
then pressress SELECT.
Press or to scroll to Home volume or Cell volume, then
press SELECT.
Press or to sample each ringer volume level.
Press SELECT to save your selection. You hear a
conrmation tone.
The ringer volume also determines the ringer volume for intercom
calls. If the ringer volume is set to off, that handset is silenced for all
incoming calls except paging tone.
1.
2.
3.
•
•
1.
2.
3.
4.
5.
Telephone settings
ECO
Volume:
ECO
Home volume
ECO
Ringers
To Next Page
Loading...
Need help?
General
