VTech DS6751-2 User Manual

42
To initiate an intercom call at the telephone base:
Press MENU on the telephone base when not in use.
Press or to scroll to Intercom, then press SELECT.
If you have only one handset, the telephone base
shows Calling HS 1.
If you have two or more handsets, the telephone base
displays Intercom to: Press 1-5 for HANDSET 1 to
HANDSET 5. The telephone base displays Calling HS X.
The destination handset rings and its screen displays
Base is calling.
2. To answer the intercom call on the destination handset,
press /HOME, /CELL, or any dialing key (0-9,
TONE or �UIET
#
). Both devices now display Intercom.
3. To end the intercom call at the telephone base, press
/HOME or /CELL. Both devices display
Intercom ended.
- OR -
To end the intercom call on the destination handset, press OFF or place the handset
back in the telephone base or charger. Both devices display Intercom ended.
If you do not have any handset registered to the telephone base, you will hear two
beeps when you press SELECT to choose Intercom in the menu.
You can cancel the intercom call before it is answered by pressing CANCEL.
You can press OFF or MUTE on the cordless handset to temporarily silence the
intercom ringer.
If the destination handset does not answer the intercom call within 100 seconds,
is accessing the answering system, on a call or out of range, the telephone base
displays Unable to call and returns to idle mode.
1.
2.
•
•
•
•
•
•
Base is calling
ECO
10:01
AM
11/20
Intercom
MSG #
1
10:01
AM
11/20
Intercom to:
MSG #
1
Multiple handset use

VTech DS6751-2 Specifications

General

Brand	VTech
Model	DS6751-2
Category	Cordless Telephone
Language	English