22
Follow Steps 1 and 2 in the section of
.
Press and
p
q
to select .
Press to confirm and to confirm again.
Paging is a useful way for finding lost handset(s).
Press on the base station. All the registered and
available handsets will produce the paging tone and
“” is displayed on the LCD.
Press / / on any handset or on the base
station again to stop paging.
NOTE
If there is an incoming call during paging, the phone will ring
with the incoming call instead of paging.
This feature is only applicable when there are at least two
registered handsets. It allows you to make internal calls,
transfer external calls from one handset to another handset and
make conference calls. If the called handset is not answered
within 60 seconds, the called handset will stop ringing and the
calling handset will return to standby mode.
1.
2.
3.
1.
2.
To Next Page
Loading...
Need help?
General
