EasyManua.ls Logo

VTech ES1310 - User Manual

VTech ES1310
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Models: ES1310/
ES1310-2/ES1320/
ES1320-2
User’s manual
www.vtech.com

Table of Contents

Questions and Answers

  • R
    Robert MoralesJul 31, 2025
    What to do if my VTech Cordless Telephone does not work?
    • J
      Julie AustinJul 31, 2025
      If your VTech Cordless Telephone isn't working, ensure the batteries are correctly installed and charged. Check that the power adapter is securely plugged into an outlet not controlled by a wall switch, and the telephone line cord is firmly connected to both the base and the wall jack. Try unplugging the base's power, waiting 15 seconds, and plugging it back in, allowing a minute for synchronization. If problems persist, remove and re-insert the batteries or try new batteries. As a last step, disconnect the base and plug in a known working telephone; if it also fails, the issue likely lies with your wiring or telephone service, requiring you to contact your service provider.
  • E
    Elizabeth MartinAug 6, 2025
    How to fix low battery on VTech Cordless Telephone?
    • R
      rodriguezedwardAug 6, 2025
      To address a low battery indication on your VTech Cordless Telephone, place the handset in the telephone base for recharging. Alternatively, remove and reinstall the batteries, use the handset until the battery is fully depleted, and then recharge it in the base. If these steps don't resolve the issue, consider replacing the batteries.
  • B
    Benjamin ShawAug 17, 2025
    What to do if VTech ES1310 batteries don't charge?
    • S
      sanchezlisaAug 18, 2025
      If the batteries in your VTech Cordless Telephone are not charging, first ensure the handset is correctly placed in the telephone base. Remove and reinstall the batteries, then charge the handset for up to 16 hours. If the problem persists, you may need to purchase new batteries.
  • T
    Teresa FoxAug 25, 2025
    What to do if VTech ES1310 Cordless Telephone is not responding?
    • C
      Chelsea HortonAug 25, 2025
      If your VTech Cordless Telephone is not responding normally, try these steps: 1. Place the handset in the telephone base. 2. Disconnect the power to the telephone base. 3. Disconnect the batteries on the handset. 4. Wait a few minutes before reconnecting power to the telephone base. 5. Re-install the batteries and place the handset in the telephone base. Allow up to one minute for the handset to synchronize with the telephone base.
  • C
    Craig PetersonNov 11, 2025
    Why does my VTech ES1310 have interference?
    • J
      Jessica SampsonNov 11, 2025
      Interference during calls on your VTech Cordless Telephone can occur for several reasons. The handset may be out of range; try moving closer to the base. If you have high-speed internet (DSL), ensure a DSL filter is installed between the base and the wall jack. Other appliances or cordless phones on the same circuit can cause interference; try moving them to a different outlet. Electronic devices like wireless routers, radios, cell phones, computers, and kitchen appliances can also interfere; keep the phone as far away from these as possible. Try plugging your phone into a different location, especially if using a modem or surge protector, and ensure the base is centrally located and elevated for better reception. If problems persist, test with a corded phone to rule out issues with your w...

Summary

Important Safety Instructions

General Safety Precautions

Essential safety guidelines for using the telephone equipment to prevent injury and damage.

Set Up The Telephone

Connecting the Base Station

Step-by-step instructions for connecting the base station power and telephone line.

Handset Battery Installation and Charging

Procedure for installing NiMH batteries and charging the handset.

Get To Know Your Phone

Using Your Phone

Making and Answering Calls

Instructions for initiating and responding to phone calls.

Call Handling and Management

Features for ending calls, adjusting volume, muting, locking keypad, and redialing.

Phonebook

Managing Phonebook Entries

Adding, viewing, searching, editing, and deleting phonebook entries.

Phone Settings

Answering System (For ES1320;1320-2 Only)

Answering System Operation

Turning the system on/off, listening to messages, and deleting them.

Remote Access and Commands

Activating, accessing, and controlling the answering system remotely.

Troubleshooting

Care and Maintenance Instructions

VTech ES1310 Specifications

General IconGeneral
Number of Handsets1
DECT 6.0 TechnologyYes
Caller IDYes
Call WaitingYes
Standby TimeUp to 5 days
Last Number RedialYes
MuteYes
Volume ControlYes
Ringer ControlYes
ExpandableNo
Frequency1.9 GHz
IntercomNo
Power RequirementsAC adapter
TypeCordless Phone
DisplayLCD
Battery TypeNiMH

Related product manuals