36
8.10 Set the Recording Time of Incoming Message
You can set the maximum length of the recording time of the incoming messages.
Press then
p
q
to select ANS. MACHINE.
Press then
p
q
to select TAM SETTINGS.
Press then
p
q
to select RECORD TIME (Available options: 60, 120, 180
seconds or UNLIMITED).
Press then
p
q
to select your desired recording time.
Press to conrm.
8.11 Activate Remote Access
Your phone lets you check your messages, or otherwise operate your answering
system, remotely. You can do this by calling the answering system when you are away
from home and entering a 4-digit remote access PIN on a tone-dialling phone.
Use the 4-digit remote access PIN code to prevent unauthorised access to your
answering system.
8.11.1 Change the 4-digit Remote Access PIN
Press then
p
q
to select ANS. MACHINE.
Press then
p
q
to select TAM SETTINGS.
Press then
p
q
to select CHANGE PIN.
Press to enter the old PIN. (Default Remote Access PIN is 0000).
Press to enter the New PIN.
Press to enter the New PIN again.
Press to reconrm.
NOTE
If the new PIN entered in Step 6 is not matched with the new system PIN entered in
Step 5, user is requested to enter the valid system PIN again in Step 5.
8.11.2 Activate or Deactivate the Remote Access
Press then
p
q
to select ANS. MACHINE.
Press then
p
q
to select TAM SETTINGS.
Press then
p
q
to select REMOTE ACC.
Press then
p
q
to select ON or OFF to turn the remote access on or off
respectively.
Press to conrm.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.