VTech ES1310 User Manual

30
7.4.6 ECO Mode Setting
Press and
p
q
to select BS SETTINGS.
Press and
p
q
to select ECO MODE.
Press and
p
q
to select ON or OFF.
Press to conrm.
7.5 Registration
Your handset and the base station are pre-registered. If for some reason, the handset
is not registered to the base ( ashes even when the handset is near the base
station), register your handset according to the following procedure.
Press and hold on the base station for about ve seconds, the base station is
entered into registration mode.
Press then
p
q
to select REGISTRATION.
Press then enter the 4-digit system PIN.
Press to conrm.
If the handset registration is successful, the icon will stop ashing. The handset will
automatically be allocated the next available handset number. This handset number is
shown in the handset screen in idle mode. If the handset registration is unsuccessful,
the icon will still ash.
7.6 Reset Your Phone
You can reset your phone to the default settings. After reset, all your personal settings
and call list entries will be deleted, but your phonebook remains unchanged.
Press then
p
q
to select DEFAULT.
Press then enter the 4-digit system PIN.
Press to conrm.
Press to re-conrm.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
4.

VTech ES1310 Specifications

General

Brand	VTech
Model	ES1310
Category	Cordless Telephone
Language	English