4
2.3 Connect the Base Station
Plug the mains power cable into the base station, the other end of the power adapter
into the wall outlet not controlled by a wall switch.
Plug one end of the telephone line cord into the base station and the other end into
the telephone wall socket. If you have DSL high speed internet service, a DSL lter
(not included) is required.
NOTES
Always use the cables supplied with the product.
Use only the power adapter supplied with the base station.
2.4 Connect the Charger (For ES1310-2 & ES1320-2 only)
Plug the power cable into the charger base.
Plug the other end into a power wall socket not controlled by a wall switch.
1.
2.
1.
2.
1.
2.
Power adapter cable
To Next Page
Loading...
Need help?
General
