VTech ES2310-2A User Manual (English)

Questions and Answers:

B
Brandi DiazAug 7, 2025
Why is my VTech Cordless Telephone not working?
- D
  Donna HunterAug 7, 2025
  If your VTech Cordless Telephone isn't working, ensure the batteries are correctly installed and charged, returning the handset to the base after use for optimal performance. Also, check that the power adapter is securely plugged into an outlet not controlled by a wall switch and that the telephone line cord is firmly connected to both the base and the wall jack. Try unplugging the base, waiting 15 seconds, and plugging it back in, allowing a minute for synchronization. If issues persist, remove and re-insert the batteries or replace them if necessary. As a final step, test the wall jack with another working telephone to rule out wiring or service problems; if the other phone also fails, contact your telephone service provider.
J
Joseph SmithAug 14, 2025
How to fix VTech ES2310-2A Cordless Telephone batteries that do not charge?
- L
  lsmithAug 14, 2025
  If your VTech Cordless Telephone batteries aren't charging, ensure the handset is correctly placed in the telephone base. Try removing and reinstalling the batteries, then charge the handset for up to 14 hours. If the issue continues, you might need to purchase new batteries.
S
Stacy MooreAug 22, 2025
What to do if there is interference during a VTech Cordless Telephone conversation?
- J
  jenniferrichardsAug 22, 2025
  If you experience interference or fading calls on your VTech Cordless Telephone, try moving the handset closer to the telephone base. If you have high-speed internet (DSL) through your phone line, ensure a DSL filter is installed between the base and the wall jack. Also, try moving the base or other appliances to a different outlet to avoid electrical interference.
D
Dana LewisAug 29, 2025
What to do if low battery shows on VTech ES2310-2A screen?
- E
  Erik RussellAug 29, 2025
  If your VTech Cordless Telephone displays a low battery warning, place the handset in the telephone base to recharge it. If the problem persists, remove and reinstall the batteries, use the handset until the batteries are fully depleted, and then recharge it in the base. If these steps don't resolve the issue, consider replacing the batteries.

VTech ES2310-2A Specifications

General

Brand	VTech
Model	ES2310-2A
Type	Cordless Telephone
Number of Handsets	2
Caller ID	Yes
Call Waiting	Yes
Speakerphone	Yes
Intercom	Yes
Volume Control	Yes
DECT 6.0 Technology	Yes
Frequency	1.9 GHz
Backlit Display	Yes
Expandable	Up to 5 handsets

Summary

Important Safety Instructions

Set Up The Telephone

Package Contents

Lists items included in the phone package.

Location

Guidelines for optimal placement of the base unit to reduce interference.

Connect the Base Station

Instructions for connecting the base station to power and the telephone line.

Connect the Charger

Instructions for connecting the charger to the power outlet.

Install and Charge the Handset Battery

Steps to install batteries and charge the handset for the first time.

Get To Know Your Phone

Overview of the Handset

Identifies and describes the functions of each button and component on the handset.

Overview of the Base Station

Identifies and describes the components of the base station.

Handset LCD Display Icons and Symbols

Explains the meaning of various icons displayed on the handset's LCD screen.

Menu Structure

Outlines the hierarchical structure of the phone's menu system.

Text and Digit Entry Table

Details how to enter text and digits using the phone's keypad, including character sets.

Use Your Phone

Switch ON/OFF the Handset

Instructions for powering the handset on and off.

Make a Call

Explains methods to initiate calls: preparatory dialing, direct dialing, from phonebook, call list, and redial list.

Answer a Call

How to answer incoming calls on the handset, with or without auto answer.

Adjust Earpiece and Speakerphone Volume

Adjusts the audio volume for listening and speaking during calls.

Mute a Call

Temporarily disable the microphone during a call.

End a Call

Procedures for terminating an active phone call.

Call Timer

Displays the duration of calls made on the handset.

Set the Silent Mode

Enables or disables the handset's ringer.

Turn the Keypad Lock ON/OFF

Prevents accidental button presses by locking the keypad.

Redial the Last Number

How to redial previously called numbers from the redial list.

Find the Handset (PAGING)

Locates a misplaced handset by making it ring.

Make an Internal Call

Enables calls between registered handsets, call transfer, and conference calls.

Private Phonebook

Store a Number Entry in the Phonebook

Guides on saving new contacts with names, numbers, and melodies, including entry tips.

Review an Entry

Browse existing contacts stored in the phonebook.

Dial an Entry

Initiate calls to contacts directly from the phonebook or via alphabetical search.

Edit a Phonebook Entry

Modify details of existing contacts in the phonebook.

Delete a Phonebook Entry

Remove a single contact from the phonebook.

Delete the Entire Phonebook Entries

Clear all stored contacts from the phonebook.

Check Phonebook Status

View the number of used and available phonebook slots.

Phone Settings

Date and Time Settings

Configure the phone's date and time, including format.

Handset Settings

Customize handset features: alarm, ringtones, volume, display, auto answer, renaming.

Set the Ringer Melody for External Calls

Select distinct ringtones for incoming external calls.

Set the Ringer Melody for Internal Calls

Select distinct ringtones for incoming internal calls.

Set the Ringer Volume

Adjust the loudness of the handset's ringer.

Set Alert Tones

Configure tones for key presses, low battery, and out of range.

Rename the Handset

Assign a custom name to the handset.

Choose the information to be Displayed in Idle

Select what information (time or name) appears on the idle screen.

Set the AUTO Answer

Enable or disable the automatic answering feature.

Base Settings

Configure base station settings: dial mode, flash time, PIN, ECO range.

Set the Flash Time

Configure the duration of the flash hook signal.

Change the System PIN Code

Modify the 4-digit PIN for system settings.

Set the ECO range

Adjust the power saving ECO range for radiation and range.

Reset Your Phone

Restore the phone to its factory default settings.

Register a Handset

Add a new or unregistered handset to the base station.

Deregister a Handset

Remove a registered handset from the base station.

Caller Display (Network Dependent)

Call List

Information on storing and viewing received calls with caller ID, including screen messages.

View the Call List

Access and review the history of incoming calls.

Store a Call List Number into the Phonebook

Save a number from the call list into the phonebook.

Delete an Entry in the Call List

Remove a single entry from the call list.

Delete the Entire List of the Call List

Clear all entries from the call list.

View the Details of the a Call Entry

Display detailed information about a specific call entry.

Default Settings

Troubleshooting

Troubleshooting Common Issues

Provides solutions for common problems like the phone not working, low battery, or interference.

Technical Specifications

Care and Maintenance

Related product manuals

VTech ES2310-2A User Manual

Table of Contents

Questions and Answers:

VTech ES2310-2A Specifications

Summary

Important Safety Instructions

Set Up The Telephone

Package Contents

Location

Connect the Base Station

Connect the Charger

Install and Charge the Handset Battery

Get To Know Your Phone

Overview of the Handset

Overview of the Base Station

Handset LCD Display Icons and Symbols

Menu Structure

Text and Digit Entry Table

Use Your Phone

Switch ON/OFF the Handset

Make a Call

Answer a Call

Adjust Earpiece and Speakerphone Volume

Mute a Call

End a Call

Call Timer

Set the Silent Mode

Turn the Keypad Lock ON/OFF

Redial the Last Number

Find the Handset (PAGING)

Make an Internal Call

Private Phonebook

Store a Number Entry in the Phonebook

Review an Entry

Dial an Entry

Edit a Phonebook Entry

Delete a Phonebook Entry

Delete the Entire Phonebook Entries

Check Phonebook Status

Phone Settings

Date and Time Settings

Handset Settings

Set the Ringer Melody for External Calls

Set the Ringer Melody for Internal Calls

Set the Ringer Volume

Set Alert Tones

Rename the Handset

Choose the information to be Displayed in Idle

Set the AUTO Answer

Base Settings

Set the Flash Time

Change the System PIN Code

Set the ECO range

Reset Your Phone

Register a Handset

Deregister a Handset

Caller Display (Network Dependent)

Call List

View the Call List

Store a Call List Number into the Phonebook

Delete an Entry in the Call List

Delete the Entire List of the Call List

View the Details of the a Call Entry

Default Settings

Troubleshooting

Troubleshooting Common Issues

Technical Specifications

Care and Maintenance

Related product manuals