38
8.11.4 Remote Commands
When the answering system is set to ON and when there is an incoming message, the
base will start call screening automatically after the preset numbers of rings of answer
delay.
Keys Functions
While message is NOT playing While message is playing
2 - Delete the current message
playback
4 - Skip to repeat playing the current
message from the beginning.
Press twice to skip backward to the
previous message.
5 Play the message Stop the current message playback
6 - Skip to play the next message
7 Turn on the answering system -
8 - Stop the current message playback
9 Turn off the answering system -
* Enter the 4-digit remote access PIN -
At any time if you want to pick up the call, you can press on the handset and the
message recording will be stopped automatically. If the answering system is in the
process of recording, the message already stored will be saved.
To Next Page
Loading...
Need help?
General
