17
Your gz 2434 Handset is equipped with a 2.5mm Headset Jack for use with an
optional accessory Headset for hands-free operation. If you choose to use the
Headset option, you must obtain an optional accessory Headset, which is compatible
with the gz 2434.
To purchase a Headset, call VTech Customer Service at 1-800-595-9511.
Once you have a compatible 2.5mm Headset, locate the Headset Jack on the gz 2434
Handset. Connect the plug on the Headset cord to the jack (under a small rubber
flag) on the cordless Handset. The plug should fit securely. Do not force the
connection.
NOTE :
Whenever a compatible Headset is
connected to the cordless Handset, the
microphone on the Handset will be
muted. This is done to limit the effect
of background noise.
Belt Clip
The gz 2434 is also equipped with a
detachable belt clip. Align the pins on the
inside edge of the clip with the notches
on the sides of the Handset. The belt
clip should snap securely into place. Do
not force the connection.
Headset Operation
To Next Page
Loading...
Need help?
General
