www.vtechphones.com
31
Additional information
Troubleshooting
Problem Suggestion
The CHARGE/IN
USE Indicator on the
telephone base is
ashing
• This is a signal that the battery is very low, completely depleted, or when there is no electrical
contact between the battery and the telephone base.
• Ensure the connector of the battery is securely plugged into the handset and place the handset in
the telephone base for charging.
There is no dial tone. • First, try all the above suggestions.
• Move the cordless handset closer to the telephone base. It might be out of range.
• The telephone line cord might be malfunctioning. Try installing a new telephone line cord.
• Disconnect the telephone base from the telephone jack and connect a different telephone. If there
is no dial tone on the telephone either, the problem is in your wiring or local service. Contact your
local telephone company.
To Next Page
Loading...
