4
Connecting the InnoTV™ Console to a TV
1. Turn off your television set.
2. Plug the end of the HDMI cable nearest to the ferrite core into the
HDMI Out port located on the back of the console, and then connect
the other end to the HDMI In port on the television.
3. Insert the Power Adapter plug into the InnoTV™, and then plug the
Power Adapter into a power outlet.
4. Turn on your television set and select the proper HDMI input.
Turning the Console on and off
1. Turn on the TV, and then set the TV input to HDMI.
2. Press and hold the Power button
until the green light comes on.
3. To turn the console off, press the Power button again. The green light
will turn off.
HDMI Out
Port
Adaptor
Jack
HDMI In Port
Ferrite core
Light
Power Button
To Next Page
Loading...
