VTech InnoTV - Cartridge and Controller Handling; Cartridge Insertion and Removal; Controller Battery Installation

7
Inserting/Removing Cartridges
Using the InnoTV
TM
Controller
Inserting batteries into the controller
1. Open the battery compartment located under the controller.
2. Insert 2 AA batteries, in accordance with the polarities indicated
inside the battery compartment.
3. Put the cover back in place.
Insert a cartridge into the cartridge
slot on the top of the console. The
cartridge should lock into place.
Press the
(Eject)
button to remove the
cartridge.