VTech Kidi DJ MIX - Power Adapter Connection; Power Supply Safety Guidelines

7
POWER ADAPTER CONNECTION
• Make sure your Kidi DJ Mix is turned off.
• Locate the AC Adapter Jack on the side of the unit.
• Connect an AC adapter (not included) to the AC Adapter Jack.
• Plug the adapter into a power outlet.
• Press the Power Button to turn the system On.
Note: When the toy is not going to be used for an extended period of
time, unplug the adapter.
Safety information when using power
supply for toys
VTech recommend a power supply (AC/DC adaptor) of the below
specication:
Power rating: 6V/800mA DC output with 3.5mm plug (positive centre).
• This toy shall only be used with a power supply for toys.
• The power supply is not a toy.
• This toy is not intended for use by children under 3 years old.
• Do not connect the toy to more than the recommended number of
power supplies.
• Never clean a plugged in toy with liquid.
• Please examine the power supply periodically for conditions that
mayresultintheriskofre,electricshock,orinjurytopersons
(such as damage to the supply cord, output cord, plug, blades,
housing, or other parts) and that, in the event of such conditions,
the power supply should be scrapped.
• Power supplies for toys are not intended to be used as toys,
and the use of these products by children shall be under the full
supervision of parents.