The headphone holder can be detached if necessary.
Noted: The headphone holder assembly should be removed by an
adult.
Tool required: Philips screwdriver (not included)
• Locate the screws attaching the headphone holder to the back of
KidiGo
®
.
• Loosen the screws with a screwdriver so that the holder can be
removed.
• Keep the screws and detached headphone holder in a safe place so
that they can be reattached as required.
• To replace, put the headphone holder and screws in position, then
tighten the screws. Do not over-tighten the screws.
Headphone Holder
Player Headphones
Maximum output voltage
≤150mV
Wide band
characteristic voltage
≥75mV
To Next Page
Loading...
