50
Answering system operation
Message playback
On the telephone base, if you have new messages, the telephone plays only the
new messages (oldest first). If there are no new messages, the telephone plays
back all messages (oldest first).
On the handset, if you have both new and old messages, you can play either new or
old messages. The caller ID information displays on the handset screen when you
play messages and you can call back the caller.
When playback begins, you hear the total number of messages followed by the
day and time of the message. If the time and date are not set, the telephone
announces, “Time and date not set.” After the last message, the telephone
announces, “End of messages.”
To play messages with the telephone base:
Press /PLAY/STOP when the telephone is not in use.
Options during playback:
Press /VOL or /VOL to adjust the speaker volume.
Press /SKIP to skip to the next message.
Press /REPEAT once to repeat the message currently playing.
Press /REPEAT twice to listen to the previous message.
Press X/DELETE to delete the message currently playing. The system
advances to the next message.
Press /PLAY/STOP to stop. The telephone plays a long beep.
•
•
•
•
•
•
To Next Page
Loading...
Need help?
General
