VTech PJ Masks Super Learning Watch User Manual

7
7
7
TO BEGIN USING THE VTECH
®
PJ MASKS SUPER LEARNING WATCH
When you use the watch for the first time, open the cover, then press
the LEFT+RIGHT+OK Buttonsforapproximately5secondstounlock
thetrymemode.Youwillhearthree‘beeping’soundswhenthetryme
mode is unlocked. You can then press any button to activate the watch
and set the time.
PresstheLeft/Right Buttons to select, then press the OK Button to
confirm and move to the next option. A tick will be displayed when the
setting is complete.
Note:
• When the battery level is low, most functions on the watch may
not be activated, except for the clock display. It is recommended
to change a new battery as soon as possible before further use.
• If the battery level is too low and cannot keep the clock running,
you will need to enter the time and date again after the battery
has been replaced.
AUTOMATIC POWER OFF
To save power, the V Tech
®
PJ Masks Super
Learning Watch will automatically power off
whentherehasbeennoinputforabout30
seconds.Pressanybuttonoropenthecoverto
turn the unit ON again.
The unit will also automatically turn OFF when the
battery power is very low. If you see the Low Battery
icon appear on screen, please replace the battery.

VTech PJ Masks Super Learning Watch Specifications

General

Brand	VTech
Model	PJ Masks Super Learning Watch
Category	Watch
Language	English