VTech VCS754 - call_settings Module: Call Settings

Configuration File Parameter Guide 116 Back to Contents
VCS754 Administrator and Provisioning Manual
"call_settings" Module: Call Settings
The call settings configure data related to a user's call preferences. The data is stored
internally at /mnt/flash/CallSettings.xml.
All the call settings (except one) follow the format: call_settings.account.x.[element] where
x is an account number ranging from 1 to 3.
All the call settings are included in the MAC-specific configuration file.
Setting:
call_settings.account.x.block_anonymous_enable
Description: Enables or disables anonymous call blocking.
Values: 0 (disabled), 1 (enabled) Default: 0
Setting:
call_settings.account.x.outgoing_anonymous_enable
Description: Enables or disables outgoing anonymous calls.
Values: 0 (disabled), 1 (enabled) Default: 0
Setting:
call_settings.account.x.dnd_enable
Description: Enables or disables Do Not Disturb for account x.
Values: 0 (disabled), 1 (enabled) Default: 0
Setting:
call_settings.account.x.dnd_incoming_calls
Description: Sets whether incoming calls are shown or rejected when DND is on for
account x.
Values: show, reject Default: reject
Setting:
call_settings.account.x.call_fwd_always_enable
Description: Enables or disables Call Forward Always for account x.
Values: 0 (disabled), 1 (enabled) Default: 0
Setting:
call_settings.account.x.call_fwd_always_target
Description: Sets the Call Forward Always target number for account x.
Values: Text string Default: Blank