VTech VCS754 - Page 86

Configuration File Parameter Guide 86 Back to Contents
VCS754 Administrator and Provisioning Manual
Setting: sip_account.x.inter_digit_timeout
Description: Sets the inter-digit timeout (in seconds) for account x. The inter-digit
timeout sets how long the VCS754 waits after the last digit is entered
before dialing the number.
Values: 1–10 Default: 3
Setting:
sip_account.x.maximum_call_number
Description: Sets the maximum number of concurrent active calls allowed for that
account.
Values: 1–6 Default: 6
Setting:
sip_account.x.dtmf_transport_method
Description: Sets the transport method for DTMF signalling for account x.
Values: auto, rfc2833, inband, info Default: auto
Setting:
sip_account.x.unregister_after_reboot_enable
Description: Enables or disables the VCS754 to unregister account x after rebooting.
Values: 0 (disabled), 1 (enabled) Default: 0
Setting:
sip_account.x.primary_sip_server_address
Description: Sets the SIP server IP address for account x.
Values: Text string Default: Blank
Setting:
sip_account.x.primary_sip_server_port
Description: Sets the SIP server port for account x.
Values: 1–65535 Default: 5060
Setting:
sip_account.x.primary_registration_server_address
Description: Sets the registration server IP address for account x.
Values: Text string Default: Blank