VTech VCS754 - Page 94

Configuration File Parameter Guide 94 Back to Contents
VCS754 Administrator and Provisioning Manual
Setting: sip_account.x.display_name
Description: Sets the account name displayed on the device LCD. This could be the
account user's name or another descriptor.
Values: Text string Default: Blank
Setting:
sip_account.x.user_id
Description: Sets the account ID for account x. Depending on your service provider's
specifications, this could be an extension number.
NOTE: Do not enter the host name (e.g. "@sipservice.com"). The
configuration file automatically adds the default host name.
Values: Text string Default: Blank
Setting:
sip_account.x.authentication_name
Description: Sets the authentication name for account x. Depending on your service
provider's specifications, this could be identical to the user ID.
Values: Text string Default: Blank
Setting:
sip_account.x.authentication_password
Description: Sets the authentication password for account x.
Values: Text string Default: Blank
Setting:
sip_account.x.feature_sync_enable
Description: Enables or disables feature synchronization for account x. When
enabled, features configured on the service provider's web portal will
automatically be updated on the device's WebUI.
Values: 0 (disabled), 1 (enabled) Default: 0
Setting:
sip_account.x.mwi_uri
Description: Sets the MWI URI that will be used for MWI subscription. If this setting is
left blank, the VCS754 uses the account x user ID for MWI subscription.
Values: SIP URI text string Default: Blank