VTech VM4263 - Page 9

9
Main
menu
Sub-menu
Volume
• Adjust the parent unit
speaker volume.
Settings
Brightness
• Adjust the parent unit LCD
screen brightness level.
Screen off timer
• The parent unit screen will
turn off after the selected
time to save energy. You
can still hear your baby
while the screen is turned
off.
VOX (Voice Activated Alert)
Sensitivity
• When VOX is selected,
the parent unit screen will
automatically turn on when
detected sounds exceed
a set level. You can adjust
the baby unit microphone
sensitivity level so that the
higher the sensitivity level,
the more sensitive the baby
unit is in detecting sounds
for transmitting to the
parent unit. For details, see
the Sound sensitivity and
sound activation section.
• The parent unit will then
turn off again after 50
seconds if the sound
detected is lower than the
set level.
NOTESNOTE
Note
When the parent unit screen
is off, if alerts are received, for
example, no signal received
between the parent unit and
baby unit, or a low battery, the
parent unit screen will turn on.
Lullaby
• Select between two lullabies or
two sounds to play or stop.
Lullaby volume
• Adjusts the baby unit
speaker volume when
playing a lullaby.
Main
menu
Sub-menu
Zoom
• Zoom in and out of the
video displayed from the
baby unit.
Temperature
• Set temperature display in
Fahrenheit (
o
F) or Celsius (
o
C).
• Set the minimum/maximum
temperature.
• Turn on/off temperature alert
tone.
• Set the parent unit to beep
whenever the room temperature
detected by the baby unit falls
outside of the set temperature
range.
Parent unit icons
4
Status check