3. Press ▲ CID or ▼ to highlight On or Off, then press MENU/SELECT to save the setting. You hear a
confirmation tone.
NOTES
If you set SCB On/Off to Off, all settings under Set profile (see below) will be invalid.
Set profile
There are five profile setting options, which allows you to quickly set up Smart
call blocker.
1. Press CALL BLOCK on the handset or telephone base to enter the call block menu when the telephone is not
in use.
– OR –
Press MENU/SELECT to enter the main menu when the handset is not in use. Then, press ▼ CID or
▲ to scroll to Smart call blk. Press MENU/SELECT.
2. Press ▼ CID or ▲ to scroll to Set profile, then press MENU/SELECT.
3. Press ▼ CID or ▲ to select one of the following options, then press MENU/SELECT.
Screen unknown
Screen any home calls without numbers or with numbers not saved in the directory, allow list, or star name list.
This profile setting sets the telephone to screen all unknown home calls and asks the callers to say their names
before putting the calls through to you. See Screen unknown home calls.
Screen robot
Screen robocalls.
– This profile setting sets the telephone to screen all unknown home calls and asks the callers to press the
pound key (#) before putting the calls through to you. See Screen robocalls.
Allow unknown (default setting)
Allow all unknown home calls to ring, except calls with numbers saved in the block list.
– This profile setting sets the telephone to allow all unknown home calls to get through and ring. Calls with
numbers saved in the block list will be rejected.
UnknownToAns.S
Forward all unknown home calls to the answering system.
• This profile setting sets the telephone to forward all unknown home calls to the answering system.
Block unknown
Block all unknown home calls.
To Next Page
Loading...
