• This profile setting sets the telephone to block all unknown home calls.
After selecting a profile setting, make sure you have not turned off Smart call blocker. Refer to the Set Smart call
blocker on/off section to it on.
NOTES
If you set SCB On/Off to Off, selected setting under Set profile will be invalid, and all incoming home and cell
calls will ring, including calls with numbers in your block list.
There may be robocalls that you do not want to miss. For example, robocalls with announcements or notices
from schools or pharmacies. You can set up your star name list with these caller names to allow their calls to
get through to you. See Star name list.
Block list
Add numbers that you want to prevent their calls from ringing through. The block list stores up to 1,000 entries.
NOTE
Home or cell calls with numbers that have been added to your block list will be blocked.
Add a block list entry
1. Press CALL BLOCK on the handset or telephone base to enter the call block menu when the telephone is not
in use.
– OR –
Press MENU/SELECT to enter the main menu when the handset is not in use. Then, press ▼ CID or
▼ to scroll to Smart call blk. Press MENU/SELECT.
2. Press ▼ CID or ▼ to scroll to Block list, then press MENU/SELECT.
3. Press ▼ CID or ▼ to scroll to Add new entry, then press MENU/SELECT.
4. When the screen shows Enter number, use the dialing keys to enter a telephone number (up to 30 digits).
• Press ▼ CID or ▼ to move the cursor to the left or right.
• Press VOICE/MUTE/DELETE on the handset or X/DELETE on the telephone base to erase a digit. •
Press and hold VOICE/MUTE/DELETE on the handset or X/DELETE on the telephone base to erase all digits.
• Press and hold REDIAL/PAUSE to insert a three-second dialing pause (a P appears).
-OR-
Press REDIAL/PAUSE to copy a number from the redial list. Press ▼ CID or ▲ , or press REDIAL/PAUSE
repeatedly to locate the desired number. Press MENU/SELECT to copy the displayed number.
5. Press MENU/SELECT to move on to the name.
6. When the screen displays Enter name, use the dialing keys to enter a name (up to 15 characters). Press a key
repeatedly until the desired
character shows on the screen. The first character of every word is capitalized.
• Press ▼ CID or ▲ to move the cursor to the left or right.
• Press 0 to add a space.
To Next Page
Loading...
