To adjust the listening volume at the telepehone base
During a call, press VOL – or VOL + on the telephone base.
NOTES
The handset and speakerphone volume settings are independent.
When the volume reaches the minimum or maximum setting, you hear two beeps.
Set key tone
You can turn the key tone on or off for each handset and the telephone base. If you turn the key tone off, there are
no beeps when you press the keys.
Using a cordless handset or telephone base:
1. Press MENU/SELECT in idle mode.
2. Press ▼ CID or ▲ to highlight Settings, then press MENU/SELECT.
3. Press ▼ CID or ▲ to select Key tone, then press MENU/SELECT.
4. Press ▼ CID or ▲ to select the desired volume or Off.
5. Press MENU/SELECT to save.
• The screen returns to the previous menu.
• You hear a confirmation tone.
Set QUIET mode
You can turn on the quiet mode for a period of time (1-12 hours). During this period, all tones (except paging tone)
are muted. When you turn on the quiet mode, the answering system turns on automatically.
To set the duration and turn on the quiet mode
Using a cordless handset or telephone base:
1. Press and hold when the phone is not in use.
2. The screen displays Quiet: _ _ hours. Use the dialing keys (0-9) to enter the desired duration (1-12).
3. Press MENU/SELECT to save.
• You hear a confirmation tone.
• The screen displays Quiet mode on and .
To turn off the quiet mode
Press and hold when the phone is not in use. The screen displays Quiet mode off briefly and then returns to
idle.
NOTE
When you change the settings of the ringer tone or ringer volume, you can still hear the samples even if the
To Next Page
Loading...
