10
HANDSET FEATURES
IN USE/LOW BATT LED
• The IN USE LED lights when the phone line is be-
ing used by the handset.
• It flashes in cadence with an incoming ring.
• It flashes quickly during PROG mode.
• The LED will flash slowly when the handset bat-
tery is getting low and needs to be recharged.
VOLUME CONTROL
• Set Volume switch on the side of
the Handset to high (H), medium
(M) or low (L), depending on your
preference.
PHONE KEY / FLASH
FUNCTION
• Press this key to
make a call.
• If you are currently
on a call, pressing
PHONE flashes the
line. This would be
used with a feature
like call waiting to
answer your second
call.
TONE /
*
KEY
• In PULSE dialing mode,
this key is used to switch to
Temporary TONE dialing
mode.
PROG KEY
• Press PROG key to enter
PROGRAM mode. See
page 15 for more details.
OFF KEY
• Press this key to exit all
modes of operation.
CHANNEL KEY
• Pressing this key
when the handset is
in use will activate
a channel change
to the next free
channel.
• This is used if you
are experiencing
noise or interfer-
ence on the current
channel. `
MEM KEY
• Press this key to enter MEMORY
mode. See page 15 for more details.
REDIAL/PAUSE KEY
• To dial the last number that
was called on your phone.
• It can also be used to store
the last number dialed into
the speed dial memory.
See page 16 for details.
• During Speed Dial
programming, press this
key to insert a 2 second
PAUSE in dialing
sequence.
HEADSET JACK
• Connect a 2.5mm Head-
set set to the jack for
hands-free operation.
To Next Page
