23
7.1.3 Set the Time
1. Press M and +/- to select HS SETTINGS.
2. Press
M and +/- to select DATE & TIME.
3. Press
M and +/- to select SET TIME.
4. Press
M to enter the time information. The time entered will be in the format you set in Section 7.1.2.
5. Press
M to confirm.
Note:
If time has been set before, the current time will display, otherwise, "00--00" will display.
7.1.4 Set the Date
1. Press M and +/- to select HS SETTINGS.
2. Press
M and +/- to select DATE & TIME.
3. Press
M and +/- to select SET DATE.
4. Press
M to enter the date information. The date entered will be in the format you set in Section 7.1.1.
5. Press
M to confirm.
Note:
If date has been set before, the current date will display, otherwise, "01--01--10" will display.
7.2 Alarm Settings
You can use this phone to set an alarm clock. When an alarm is set, the displays on the LCD. When the alarm time
is reached, the and "ALARM ON" flash on the LCD ringing with the alarm melody for a duration of 45 seconds. You
can press any key to disable the alarm. If snooze function is activated, the alarm will sound again at the end of the
snooze period of seven minutes.
To Next Page
Loading...
Need help?
General
