Phone settings
24
Note:
a. Key press is still applicable if handset keypad is locked and when the alarm time is reached.
b. The alarm volume level is the same as the settings of the handset ringer volume. If the handset ringer is set to
VOLUME OFF, the alarm still sounds at VOLUME 1 level.
c. During an external call or internal call, if an alarm is set and when the alarm time is reached, the and "ALARM ON"
will still flash. An alarm tone will be emitted from the earpiece to notify user the alarm time is reached. Once user
press any key to disable the alarm, it will revert to the call duration screen.
d. During paging or ringing, the alarm will not sound when the alarm time is reached. However, if snooze function is
enabled, the alarm will sound again at the end of the snooze period provided that it's not ringing or in paging mode at
the end of the snooze period.
7.2.1 Turn on/off the Alarm
1. Press M and +/- to select HS SETTINGS.
2. Press
M and +/- to select ALARM.
3. Press
M and +/- to select ON/OFF.
4. Press
M to confirm.
Note:
If ON is selected, you will be asked to set the alarm time.
7.2.2 Set the Alarm Time (if the Alarm is set to be ON)
1. Follow Steps 1 to 4 in Section 7.2.1.
2. Enter the alarm time.
3. Press
M to set the snooze function.
4. Press
M and +/- to select ON or OFF.
5. Press
M to confirm.
To Next Page
Loading...
Need help?
General
