VTOMAN X1 - User Manual

Product: X1
Model: JS-211

Summary

Important Safety Information

Initial Charging Procedure

Instruction to charge the VTOMAN X1 jump starter before first use.

Key Safety Warnings

Crucial warnings about using the device with 12V batteries and potential hazards.

Product Components and Functions

Operation Instructions

Battery Power Status

How to check the current battery level indicated on the device.

Overview of Key Features

Highlights the main functionalities of the VTOMAN X1 jump starter.

Powerful Start-Up Performance

Details the jump starter's capacity to start 12V vehicles, even in extreme temperatures.

Digital Air Compressor Functionality

Explains the air compressor, its digital meter, and preset pressure function.

Advanced Thermal Design

Describes the heat dissipation design enhancing performance and lifespan.

Safety and Additional Functions

Safety First Priority

Emphasizes the built-in safety protection technologies for ultimate user safety.

Emergency Light and Power Bank

Details the multi-mode LED flashlight and the device's power bank capability.

Unit Charging Procedure

Instructions on how to recharge the VTOMAN X1 jump starter.

How to Start a 12 V Vehicle

Air Inflator Usage Guide

Device Operations and Compliance

LED Flashlight Operation

How to turn on, turn off, and switch modes for the LED flashlight.

Powering the Unit On and Off

Procedure for turning the jump starter device on and off.

Toxic and Harmful Substances

Details on toxic and harmful substances contained in the product for compliance.

Package Contents and Specifications

Included Package Items

List of all components provided in the VTOMAN X1 jump starter package.

Technical Specifications

Key technical data and performance metrics of the VTOMAN X1.

Frequently Asked Questions (FAQ)

Operating Temperature and Storage

Information on the unit's operating temperature range and proper storage guidelines.

Vehicle Starting Procedure Clarification

Reference to the guide for starting a vehicle and how to confirm correct connection.

Connection Indicator Meanings

Explanation of the LED indicator lights for correct and incorrect vehicle connections.

Troubleshooting Vehicle Start Failure

Steps to take if the unit fails to start a vehicle.

Troubleshooting Charging Issues

Guidance for resolving problems with the unit not charging or charging other devices.

Clarification on Charging While Charging

Answers whether the unit can charge other devices while being charged itself.

Charging Other Devices During Vehicle Start

Clarification on whether external devices can be charged while starting a vehicle.

Recharge Frequency Recommendation

Advice on how often the jump starter should be recharged.

Automatic Shut-off Explanation

Reason for the device shutting off after 30 seconds when charging low-power devices.

Important Safety Warnings

Warranty and Disclaimer

Warranty Coverage Details

Information about the 18-month warranty, money-back guarantee, and replacement policy.

Warranty Disclaimer

Conditions and limitations that may affect warranty claims and responsibilities.

User Attention and Precautions

Customer Support Information

Warranty and Technical Service

Summary of available warranty service and lifetime technical support.

Contact for Assistance and FAQs

Information on how to contact customer service and find more FAQs.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features
5. Warranty and Support

The VTOMAN X1 (Model: JS-211) is a versatile 2500A jump starter and 150PSI air compressor, designed to be a comprehensive emergency tool for vehicles. It integrates six key functions: car emergency start, tire inflator, lighting, SOS warning, charging for mobile devices, and starting 12V vehicle-mounted devices.

Function Description:

• Jump Starter: The X1 is equipped with a 2500A Peak current, capable of instantly starting 12V vehicles with up to 8.5L Gas or 6.0L Diesel engines. It can start a car up to 50 times on a single charge, even in extreme temperatures ranging from -4°F to 140°F (-20°C to 60°C).
• Air Compressor: It features a built-in 150PSI digital cordless air compressor with an LCD digital meter and tire pressure detection function. Users can preset desired pressure values (PSI, BAR, KPA), and the compressor will automatically shut off once the target pressure is reached. It can inflate an average car tire to 20 PSI in about 3 minutes and is suitable for bikes, cars, balls, and other inflatables.
• Emergency Light: The device includes LED lights with three modes: Normal, Strobe, and SOS, suitable for various emergency situations. The jump box tire inflator supports up to 36 hours of high-brightness lighting.
• Portable Power Bank: With USB-A 5V/2.4A and USB-C 5V/2A output ports, the X1 can charge mobile devices. It also has a DC 15V/10A output for starting 12V vehicle-mounted devices.

Important Technical Specifications:

• Capacity: 44.4Wh
• Starting Current: 400A (3s)
• Peak Current: 2500A
• USB-C Input: 5V/2A
• USB-A Output: 5V/2.4A
• DC Output: 15V/10A
• Operating Temperature: -20°C ~ 60°C / -4°F ~ 140°F
• Life Time: > 1000 Cycles (recharge cycles)
• Full Charge Time: 6-8 hours (with a 5V/2A charger, wall charger not included)
• Model: JS-211

Usage Features:

• Battery Power Check: Press the power button to check the battery level, indicated by bars (0-4 bars, representing 0%-100%). The battery icon blinks during charging and shows 4 solid bars when fully charged.
• Charging the X1: The unit can be charged using the provided Type-C cable and a wall charger (not included). It is recommended to charge it fully before first use.
• Starting a 12V Vehicle:
  1. Ensure the X1 battery power is above 2 bars.
  2. Insert the blue end of the intelligent jumper cable into the jump cable socket, ensuring the indicator on the clip is off.
  3. Connect the red clip to the positive (+) terminal and the black clip to the negative (-) terminal of the car battery.
  4. Observe the indicator light on the jumper cable:
     • Solid green light: Connection is correct and powered on. Proceed with jump-start.
     • Solid red light: Reverse connection. Reconnect correctly.
     • Flashing green light: Battery voltage is too low. Press the "BOOST" button on the jumper cable. Once the light turns solid green, complete the jump-start within 30 seconds.
     • No red or green light: Battery may be completely damaged. Ensure correct connection, then press the "BOOST" button. Once the light turns solid green, complete the jump-start within 30 seconds.
  5. Rotate the car's starting switch to START.
  6. Remove battery clips after the car starts.
  • Important Note: Do not press the "BOOST" button before connecting the vehicle battery correctly. Do not start the product more than three consecutive times; wait two minutes between attempts to prevent overheating. Do not connect clamps reversely after pressing "BOOST".
• Using the Air Inflator:
  1. Power on the device. Short press the "M" key to enter air inflator settings.
  2. Press "M" once: The far-left icon flashes. Use "+" or "-" keys to select "basketball", "bicycle", "car", or "SUV" mode.
  3. Press "M" twice: The pressure unit icon flashes. Use "+" or "-" keys to switch between "BAR", "PSI", and "KPA".
  4. Press "M" again: The current target pressure value flashes. Use "+" or "-" keys to adjust the target pressure.
  5. After selecting the mode, short press the power switch key once to start inflation.
• LED Flashlight Operation: Press the LED button once to turn on the flashlight. Each subsequent press cycles through Normal, Strobe, and SOS modes.
• Device On/Off: Press and hold the power button for two seconds to turn on/off. The device automatically shuts down after 30 seconds of inactivity.

Maintenance Features:

• Thermal Design: Features a unique honeycomb heat dissipation design, enhancing safety performance by 30% and promoting service life by 50%.
• Safety Protections: Built-in 10 safety protection technologies: over-charge, over-current, short-circuit, reverse-polarity, low-temp, high-temp, over-voltage, over-load, spark-proof, and reverse-charge.
• Storage: Store in an ambient temperature between -10°C and 45°C (14°F and 113°F). Do not store in places where the temperature exceeds 60°C/140°F, such as a vehicle parked in hot weather, as this can damage the battery.
• Recharging: Recharge the unit every 3 months to prevent over-discharge. Do not recharge immediately after starting a vehicle; allow it to cool for 30 minutes.
• General Warnings:
  • Do not submerge in water.
  • Do not disassemble or modify. Only service technicians should repair.
  • Avoid dropping or squeezing.
  • Do not expose to extreme heat or fire.
  • Keep away from children.
  • Only use for 12V vehicle batteries; not for non-12V batteries or other machines like airplanes or ships.
  • Do not use if any cable, clamp, or cord is damaged, or if the unit is overheated, swelled, or leaking fluid.
  • Do not use as a vehicle battery or battery charger.
  • Only use the provided battery clamps and a qualified charger.
  • Ensure battery terminals are clean and clamps are well connected before starting.

Warranty and Support:

• Warranty: 18 Months Online After-Sales Service, 30 Days Money Back Guarantee, and 30 Days to 18 Months replacement for manufacturing issues.
• Disclaimer: Warranty requires original receipt (order ID). It does not cover damage from normal wear and tear, physical abuse, improper installation, misuse, modification, or unauthorized repairs. VTOMAN is not responsible for accidental or indirect damage from incorrect use.
• Customer Service: 18 Months Limited Warranty Service, Lifetime Technical Service. Contact support@vtoman.com for assistance, FAQs, and more information.

VTOMAN X1 Specifications

General

Brand	VTOMAN
Model	X1
Category	Remote Starter
Language	English