How to Start a 12V Vehicle (Make sure the battery power>2 bars)
Note: Do not press the "BOOST" button on the jumper cable before connecting the vehicle
battery correctly.
1. Insert the blue end of the battery clip into the hose machine while making sure
that the indicator on the clip is off.
2.Connect the clip correctly respectively to the positive and negative ends of the
car battery, where the red clip connects to the positive pole of the battery (+)
and the black one connects to the negative pole (-).
3. Then operate following the instructions below in accordance with the state of
the indicator：
Solid green light: This indicates that the connection is correct and powered
on. You can now proceed with the emergency jump-start.
To Next Page
Loading...
