VTOMAN X5 - User Manual

Need help?

Do you have a question about the VTOMAN X5 and is the answer not in the manual?

Summary

Welcome

Charge it first!

Instructions to charge the device before use.

Safety Warning

Important safety warning for 12V battery usage and potential risks.

Key Points

Jump Starting Capabilities

Details on jump starting 12V vehicles, including capacity and operating temperature.

All-In-One Functionality

Describes the air compressor function, tire inflation, and pressure detection.

Smart Screen Features

Highlights the smart screen's display of battery level, inflator mode, and tire pressure units.

Enhanced Safety Technology

Explains safety features like reverse red light indicator and various protection mechanisms.

Upgraded Thermal Design

Explains the thermal design ensuring cool operation and durability.

Multifunctional Portable Device

Details the multifunctional nature: power bank, tire inflator, LED flashlight, and fast charging.

Included Accessories and Gift Value

Lists the items included in the jump starter kit and its suitability as a gift.

Buttons and Display Screen

Display Configuration

Explains the starter's display configuration, including electrical status and preset values.

LED Light Operation

Details how to operate the LED light and its modes.

Dormant Mode Function

Explains the automatic dormant mode entry after load removal.

Tire Inflation Settings

Guides on setting tire pressure, units (KPA, BAR, PSI), and selecting inflation items.

Preset Inflation Values

Lists preset tire pressure values for SUVs, cars, bicycles, and basketballs.

Battery Level Indicators

Explains how the battery icon bars flash during charging and low battery.

Operation Guidance

Charging the Host Machine

Instructions on how to charge the jump starter unit.

Starting a 12 V Car

Step-by-step guide for jump starting a 12V vehicle.

Charging Electronic Devices

Steps for charging smartphones and tablets using the device's USB output.

Powering 12 V Devices

Instructions for powering 12V electronic devices using the 15V output port.

LED Light Modes

Instructions on how to switch between the LED light modes.

Maintenance and Support

Product Care Precautions

Key precautions for product care, including avoiding water, disassembly, and extreme temperatures.

Customer Support Information

Information on warranty, technical service, and contact details for support.

The VTOMAN X5 is a portable lithium battery jump starter with an integrated air compressor, designed for 12V vehicles. It serves multiple functions beyond jump starting, acting as a power bank, tire inflator, and LED flashlight.

Function Description:

The primary function of the X5 is to jump start 12V vehicles with up to 9L gas or 8L diesel engines. It boasts a powerful 3500A peak current, capable of providing up to 50 jumps on a single charge. It also features a BOOST FUNCTION specifically for completely dead batteries.

Beyond jump starting, the X5 includes an air compressor that can inflate a typical car tire to 20 PSI in just 2 minutes. This feature is enhanced by real-time tire pressure detection and an auto shut-off function when the set PSI is reached, helping maintain optimal tire pressure for fuel efficiency and tire longevity. It comes with an extension air hose and three different nozzles for inflating cars, bikes, balls, and other inflatables.

The device also functions as a power bank with a 5V/9V/12V output port for fast charging electronic devices like smartphones and tablets, and a 15V 10A output port for powering 12V electronic/on-board devices. An integrated 400-lumen LED flashlight offers four lighting modes: constant white, constant red, flash, and SOS, providing illumination and distress signaling capabilities.

Important Technical Specifications:

Model No.: Epower-325
Size: 22312363mm
Weight: 1352 ±5g
Capacity: 59.2Wh
Output:
- Fast charging: 5V=3A, 9V=2A, 12V=1.5A
- 15V=10A (for 12V car starting and other devices)
- 12V car starting
Input: 9V=2A (USB-C)
Time to full charge: Approximately 4 hours (with a USB 9V/2A charger)
Starting current: 600A (3S)
Peak current: 3500A
Operating Temperature: -4°F to 140°F (-20°C to 60°C)

Usage Features:

The X5 features a large 5.1-inch smart screen that displays crucial information such as battery level, inflator mode, and tire pressure in three units (PSI, BAR, KPA), making it user-friendly.

Operation Guidance:

Charging the X5: Charge the unit using the provided Type-C cable. The battery icon bars will flash during charging, indicating the current battery level.
Jump Starting a 12V Car:
1. Insert the blue end of the battery clip into the host machine's 12V automobile starting port, ensuring the indicator on the clip is off.
2. Connect the red clip to the positive (+) terminal of the car battery and the black clip to the negative (-) terminal.
3. Observe the indicator on the smart jumper cable:
  - Green light long on: Connection is correct, and the jump starter is ready.
  - Red light long on: Incorrect positive/negative pole connection. Reconnect until the green light is on.
  - Green light flashes: Car battery pressure is too low. Press the BOOST button and start the car within 30 seconds after the green light turns solid.
  - No red or green light: Battery may be damaged. Ensure correct connection and press BOOST; start the car within 30 seconds once the green light is solid.
4. Remove the product from the car battery within 30 seconds after starting to prevent damage.
Inflating Tires:
1. Long press the power switch for 2 seconds to enter the to-be-inflated mode. The screen will display electrical configuration, preset tire pressure, static air pressure, units (BAR, PSI, KPA), and icons for different inflatable items (cars, SUVs, basketballs, bicycles).
2. Press the "Set" key to enter the inflating pump editing mode. The SUV icon will display first.
3. Use the "+" and "-" keys to adjust the pressure value.
4. Long press "Set" to change units (KPA, BAR, PSI).
5. Short press "Set" to switch between inflatable items (car, bicycle, basketball) and adjust their preset pressure values.
6. Preset values for different items: SUVs: 2.5 BAR, Cars: 2.4 BAR, Bicycles: 45 PSI, Basketballs: 8 PSI. These are reference values and should be adjusted as needed.
Charging Electronic Devices:
1. Connect a suitable charging plug to your mobile phone adapter cable.
2. Connect the USB plug of the adapter cable to the USB output port of the X5.
3. Connect the charging port to your phone/tablet.
4. Press the switch button to begin charging.
Powering 12V On-Board Devices:
1. Insert the adapter end of the adapter cable into the 15V output port of the X5.
2. Connect the 12V device to be charged to the other end of the adapter cable.
3. Tap the switch button to start powering the device.
LED Light Modes: Short press the lamp switch to turn on the white LED light. Press again for red flashing mode. Press a third time to turn off the light.
Automatic Shut-off: The product automatically enters dormant mode 30 seconds after the load is removed or charging is complete to save electricity. It can also be manually turned off by pressing the switch button for 2 seconds.

Safety Features:

VTOMAN prioritizes safety with features like:

Reverse Red Light Indicator: Notifies incorrect jump cable connections.
Comprehensive Protection: Over-charge, over-current, short-circuit, reverse-polarity, low-temp, high-temp, over-voltage, over-load, spark-proof, and reverse-charge protection.
Thermal Design: Upgraded thermal design prevents overheating during prolonged use, ensuring durability.

Maintenance Features:

Storage: The host machine can be shelved for 6-12 months after a full charge. However, it is suggested to charge it every three months to protect its service life.
General Care:
- Do not submerge in water.
- Do not disassemble.
- Do not drop.
- Avoid extreme temperatures (above 158°F or below -4°F).
- Do not place near or into fire.
- Keep the product dry.
- Charge at room temperature (32-140°F).
- Use the provided charger and battery clip.
- Ensure the blue plug of the battery clip is fully inserted into the starter port to prevent melting.
- Ensure all battery connectors are clean and clips are properly connected for optimal performance.
- Do not start the product more than three consecutive times; wait two minutes between start-ups to prevent overheating.
- Do not start the car while the host machine is charging.
Liquid Leakage: In case of liquid leakage, restore it with proper containers. If skin contact occurs, wash immediately with soap and water. If fluid contacts eyes, flush with cold running water for at least 10 minutes and seek medical attention.
Disposal: Products based on lithium batteries should be disposed of according to local regulations at the end of their service life.