PAGE 8
Charging the host machine of the jump starter
Starting a 12V car
1. Insert the blue end of the battery clip into
the hose machine while making sure that the
indicator on the clip is off.
2. Connect the clip correctly respectively to
the positive and negative ends of the car
battery, where the red clip connects to the
positive pole of the battery (+) and the black one connects
to the negative pole (-).
3. Then operate following the instructions below in accordance
with the state of the indicator：
Green light long on: indicating that the connection
is correct and the jump starter is ready to work.
OPERATION GUIDANCE
To Next Page
Loading...
