5. While choosing the mode for the inflating pump for SUVs,
cars, bicycles or basketballs, icon 4 will display the preset tire
pressure value. Note that the preset value serves as reference
only, and please adjust in accordance with the actual situation.
The preset values for different inflatable items are:
PAGE 6
BUTTONS AND DISPLAY SCREEN
4. When the product is in the standby mode or working
normally, press the "Set" key to enter the inflating pump
editing mode, after which the SUV icon will display; at the
same time, preset the tire pressure value (unit: BAR), where
you can short press the "+" "-" key to adjust the pressure
value, or long press the "Set" key to alter the unit (KPA, BAR
or PSI); short press the "Set" key to switch the item to be
inflated until the car icon displays, and preset the pressure
value (unit: BAR), before short pressing the "+" "-" key to
adjust the pressure value or long pressing the "Set" key to
switch the unit (KPA, BAR or PSI). Then short press the "Set"
button until the bicycle icon and the preset air pressure value
(unit: PSI) are displayed; press the "Set" button ag
ain to adjust
the air pressure value, and long press the "Set" button to switch
the unit (KPA, BAR or PSI). Press the "Set" button again to display
the basketball icon and the preset air pressure value (unit: PSI);
short press the "+" and "-" button again to adjust the air pressure
value. Long press the "Set" key to switch units between KPA, BAR
and PSI under the free mode.
To Next Page
Loading...
