Solid red light: This indicates that the positive and negative terminals are incor-
rectly connected. Please reconnect them correctly, and once the green light turns
solid, proceed with the emergency jump-start.
No red or green light: This may indicate that the battery is completely damaged.
Ensure the positive and negative terminals are correctly connected, then press the
BOOST button. Once the green light turns solid, complete the jump-start within 30
seconds.
Flashing green light: This indicates that the battery voltage is too low. Press the
BOOST button, and once the green light turns solid, complete the jump-start within
30 seconds.
4. Rotate the car’s starting switch to the position of START.
5. Remove the battery clips after the car is started.
To Next Page
Loading...
